January 10-11 2017: Well mates, I have been taken advantage of the good weather and decided to work on the boat.

I epoxied the two outer keel sections and began to fare down the forward outer keel. It took a bit and it is still far from perfect but it seems that it will fit well enough with epoxy. The other two section are epoxying rather well.

I went ahead and bought two pieces of 1×4 to create the stem. I came home from Lowes and laminated cut the pieces of 1x and plywood to create the stem piece. Tomorrow I will epoxy the other two pieces of outer keel and fare the stem.

Leave a Reply